PAGE 5-14
1097626, V
ER. 03
5.3.3 COMMUNICATION PORT SETTINGS
1. Once the Communication Port has been assigned/ established to communicate with the Sim-
plyGo, locate the My Computer Icon either on the computer Desktop, or through Windows start
menu.
2. Using the mouse, right “click” on My Computer and select Properties.
3. Select the Hardware tab and then the Device Manager button.
4. Select the Ports drop down arrow, locate and right “click” the USB serial port, and select Proper-
ties.
5. Select the Port Settings tab and then select the Advanced button.
6. Locate and select the Latency Timer drop down arrow and select a setting of 2.
7. Select the Ok button when applicable while closing all windows.
8. In the Data Recovery Tool communication port window, select the drop down arrow and select
Refresh. This concludes adjusting the Port setting.
5.3.4 CONTEXT HELP
The SimplyGo/SimplyFlo Data Recovery Tool application is designed with a Context Help function to describe
specific features throughout the Tool. When the application has been launched, Context Help can be accessed
by either selecting Help at the tool bar header or selecting (Ctrl+H) on the keyboard. When the mouse cursor
hovers or idles over a feature, a description is populated in the Context Help display window.
5.3.5 PROCEDURE FOR USE
1. Start the application by selecting the SimplyGo Data Recovery Tool Icon on the computer Desktop
or from the computer All Programs list.
2. Connect the USB Interface Cable, provided in the Oxygen Interface Hardware Kit, between the
Communication Module and the Computer USB port.
3. Connect the MiniDIN Interface Cable, provided in the Hardware Kit, to the Communication Module.
4. Select the communication port drop down arrow on the Data Recovery Tool Software window and
select Refresh.
To Next Page
Loading...
