PAGE 5-51097626, VER. 03
Alarm Symbol
This symbol appears when
an event occurs that
generates an audible
alarm.
Refer to the associated alarm
indicator also being displayed.
Alarm Silenced Symbol
This symbol appears when
you have pressed the
alarm silence button on the
control panel to silence an
audible alarm.
Refer to the associated
alarm indicator also being
displayed
Attention
This symbol appears when
corrective action is
required.
Ensure that the intake and
exhaust vents are not
blocked. Allow the device
to warm up. If the alarm
continues, contact your
home care provider.
1st press of the Power button =
1 beep
2nd press of the Power button =
3 beeps
On/Off Symbol
This symbol appears when
the device is powered on,
or is ready to be turned on
or off.
Press the Power
button to
turn the
device on or off.
Note
: To prevent
inadvertent
starts
and stops, the device
requires two presses
of the
Power button
to turn it on
and off.
1 short beep
Flow Control Setting
The large number on the
right side of the screen
shows the oxygen flow
setting. (In this example, it
is 2.) This number can
range from .5 to 2 for
Continuous Flow.
If this is your flow
setting,
no action is
needed.
If this is not your flow
setting
, press
the +
button to
increase this
number
or press the –
button to decrease this
number.
VISUAL, AUDIO INDICATORS DESCRIPTION WHAT TO DO
To Next Page
Loading...
