28 29
13.4 List devices
Lists those Roger devices, such as Roger receivers, that
are turned on and in the current classroom network.
How to use it:
• Ensure all Roger devices are turned on
• Swipe screen right-left to locate List devices icon
• Tap List devices (a spinning “searching” symbol will
be displayed)
• Hold Roger microphone within 10 cm / 4” of Roger
devices*
• Roger devices will be listed (listed devices already
connected to microphone will show a Connect icon)
• To stop process at any time, tap Home
Time required to list all devices may vary.
* Microphone may also detect devices located further away.
13.5 Disconnect
Disconnects Roger devices from the microphone’s
network.
How to use it:
• Swipe screen right-left to locate Disconnect icon
• Place Roger receivers (turned on) within 10 cm / 4” of
microphone
• Tap Disconnect
13.6 SoundField
Adjusts volume of a connected Roger Dynamic SoundField
DigiMaster loudspeaker. Icon appears grey if no
DigiMaster is connected to the microphone.
How to use it:
• Ensure Roger DigiMaster is turned on
• Swipe screen right-left to locate SoundField icon
• Tap SoundField
• Adust volume using +/–
To Next Page
Loading...
