Phonak Roger Touchscreen Mic - Network Function

50 51
16.8.3 CI prole
How to use it:
• Select CI prole as per list below
• Automatic (for all CI models not mentioned in the list
below)
• Prole 2 (Opus 2)
• Prole 3 (Naída CI + ComPilot/Sonnet)
• Prole 4 (Harmony/Auria +8 dB EasyGain)
• Prole 5 (MicroLink CI S)
• Prole 9 (Nucleus 5, 6)
• Proles 1, 6, 7, 8 are not currently applicable
Tap question mark (top right) to view CI prole/model list.
Please consult www.phonakpro.com (FAQ section) to check
CI proles for latest CIs on the market.
16.8.4 Default settings
Resets a Roger receiver to its default settings.
How to use it:
• Select default settings
16.9 View network
Displays which microphones (MultiTalkers) or loudspeakers
(DigiMasters) are currently connected to the Roger
Touchscreen Mic in the network. These devices must be
turned on to be shown in the list.
How to use it:
• Select View MultiTalkers (Roger microphones and
Roger media transmitters) or View DigiMasters
(Roger DigiMasters)
16.10 DigiMaster audio IN
Adjusts the audio input volume of a Roger DigiMaster
loudspeaker.
How to use it:
• To increase volume, press +
• To decrease volume, press –