Physio Control LIFEPAK 9 - Parts Lists; Schematics; Introduction; Parts List

Introduction
Parts List
© August 1993 Physio-Control
Parts Lists and Schematics
This section includes lists of replaceable parts, component layouts or
exploded views, and schematic diagrams for each major assembly of the
LIFEPAK 9 defibrillator/monitor and the optional Defibrillation Adapter.
This information is provided to assist in troubleshooting and repair.
Table 5-1 lists the figure and page number of the major assemblies for the
defibrillator/monitor. Table 5-2 lists the figure and page number of the
major assemblies for the defibrillator/monitor. Table 5-3 lists standard
reference designators for components. Supplies and accessories are listed in
Table 5-4.
Use parts lists to identify replaceable parts. The format for each list is the
same:
Ref: This column contains the reference designators or the assigned item
numbers of replaceable parts. Reference designators are abbreviated (see
Table 5-3) and are listed alphanumerically by this abbreviation. Assigned
item numbers are listed numerically, starting with 2. The number in the
heading of this column indicates the figure to which the parts list
corresponds.
Part Number: Physio-Control Corporation part number is listed in this
column. Part ordering information is provided on page 5-2.
Description: Descriptive information for a part that is used more than once
refers to the initial listing with a “Same as _” citation. This citation may
also list a component value when necessary. Static Sensitive Devices (SSDs)
are identified in this column by this symbol:
ATTENTION
For information about proper handling of SSDs during repair or replacement,
refer to page 4-5.
All Rights Reserved 5-1