Physio Control LIFEPAK 9 - General Information; Service Information

General Information
Service Before attempting to clean or repair any assembly in this instrument, the
Information technician should be familiar with the information provided in Section 4,
Service and Maintenance.
If the instrument has been dropped, damaged, or abused, a qualified
technician should complete the Performance Inspection Procedure (PIP)
in Section 3, beginning on page 3-1, to confirm whether the instrument is
operating within specifications. If calibration or more extensive testing is
required, a qualified technician can perform the Test and Calibration
Procedure (TCP) in Section 3. Component replacement and internal
adjustments must be performed only by service personnel qualified by
appropriate training and experience.
Use of non—Physio—Control defibrillation electrodes, batteries, accessories,
or adapter devices may void Safety Agency Certifications and warranty.
For assistance in servicing the instrument in the US, call Physio-Control at
1-800-442-1142. In other countries contact the local Physio-Control
representative.
©
August
1993
Physio—Control
All
Rights
Reserved
xv