Physio Control LIFEPAK 9 - Page 131

Service and
Maintenance 4
Introduction ........................................ 4-1
Special Handling Procedures For Static Sensitive
Devices (SSDs) ...................................... 41
Use Static-Dissipative Mat .............................. 4-1
Wear Wrist Strap ..................................... 4-1
Transport and Store PCBs Properly ....................... 42
Keep Work Area Static-Free ............................ 4-2
Test Work Area
Routinely
........................................,.. 42
Disassembly Procedures .............................. 4-2
Case Separation ...................................... 4-2
SAS Adapter PCB Removal ............................ 4-2
PCB Repair Precautions .............................. 4-2
Inspection Techniques ................................ 4-3
Exterior Inspection .................................... 4-3
Interior Inspection .................................... 43
Tools and Materials for Cleaning and Repair ............. 43
Cleaning Procedures ................................. 4-4
Exterior Cleaning ..................................... 4-4
Interior Cleaning ..................................... 45
Shipping Assembly ................................... 4-7
Parts Lists/
Schematics 5
Introduction ........................................ 5-1
Parts List ........................................... 5-1
Component Layouts or Exploded Views ................... 5-2
Schematic Diagrams .................................. 5-2
How to Order Parts .................................. 5-2
Supplies and Accessories .............................. 5-5
Component
Reference 6
Introduction ........................................ 6-1
Component Reference Diagrams ....................... 6-3
© November 1994 Physio—Control Corporation All Rights Reserved