C-863.12 Mercury Controller MS249E Version: 1.2.1 107
Deleting a macro
A macro cannot be deleted while it is running.
In the following, PITerminal or the Command entry window of PIMikroMove is used to enter
commands. Details on working with the Controller macros tab in PIMikroMove are in the
PIMikroMove manual.
➢ Delete a macro with the MAC DEL macroname command, whereby macro name
indicates the name of the macro.
7.7.4 Making Backups and Loading Controller Macros
For example, making backups of controller macros on the PC can be useful before updating the
firmware (p. 249).
The use of the Controller macros tab in PIMikroMove is recommended for backing up and
loading controller macros. A detailed description of the tab can be found in the PIMikroMove
manual.
Backing up controller macros onto the PC with PIMikroMove
1. Select the Controller macros tab in the PIMikroMove main window.
2. Select the macros in the Macros on controller list that you want to back up to the PC:
− Click the desired entry in the list to select an macro.
− To select several macros, hold down the Shift button and click the desired entries in
the list.
− To deselect, click an empty area in the list.
By selecting one or more macros, the (Save selected macros to PC) button becomes
active.
3. Save the selected macros on the PC:
a) Click the button to open a directory selection window.
b) Select the directory on the PC where you want to save the macros.
c) Click Save.
The macros are saved as text files (<macro name>.txt) to the directory selected on the
PC.
To Next Page
Loading...
