PI MS249E - Page 235

8 GCS Commands
C-863.12 Mercury Controller MS249E Version: 1.2.1 229
-10008
PI_PARAMETER_DB_SYSTEM_COULD_NOT
_BE_ADDED
PI stage database: Stage has
not been added.
-10009
PI_PARAMETER_DB_SYSTEM_COULD_NOT
_BE_REMOVED
PI stage database: Stage has
not been removed.
-10010
PI_PARAMETER_DB_CONTROLLER_DB_PA
RAMETERS_MISMATCH
Controller does not support
all stage parameters stored in
PI stage database. No
parameters were set.
-10011
PI_PARAMETER_DB_DATABASE_IS_OUTD
ATED
The version of PISTAGES3.DB
stage database is out of date.
Please update via
PIUpdateFinder. No
parameters were set.
-10012
PI_PARAMETER_DB_AND_HPA_MISMATC
H_STRICT
Mismatch between number
of parameters present in
stage database and available
in controller interface. No
parameters were set.
-10013
PI_PARAMETER_DB_AND_HPA_MISMATC
H_LOOSE
Mismatch between number
of parameters present in
stage database and available
in controller interface. Some
parameters were ignored.
-10014
PI_PARAMETER_DB_FAILED_TO_SET_PAR
AMETERS_CORRECTLY
One or more parameters
could not be set correctly on
the controller.
-10015
PI_PARAMETER_DB_MISSING_PARAMETE
R_DEFINITIONS_IN_DATABASE
One or more parameter
definitions are not present in
stage database. Please update
PISTAGES3.DB via
PIUpdateFinder. Missing
parameters were ignored.