THE ASR SYSTEM PREVENTS THE APPLICATION OF
HIGH SPEED ROTATION ON THE REAR WHEEL WITH THE
VEHICLE ON THE CENTRE STAND.
IT IS RECOMMENDED TO NOT INSIST WITH THE THROT-
TLE GRIP IN THIS SPECIFIC SITUATION, BECAUSE THIS
MAY CAUSE ABNORMAL STOPS AND/OR DAMAGE TO
THE CATALYSTS.
ASR System "1" deactivation button
to deactivate the ASR system, with the engine run-
ning, press the corresponding button for at least 1
second.
ASR "2" system activation icon
System active and calibrated: icon flashes when
the key is "ON", then goes off with the engine run-
ning.
ASR "3" system deactivation icon
Icon "ASR OFF": on steady with engine started,
ASR system not working or not calibrated or vol-
untarily deactivated.
ASR/ASR OFF ICON OPERATION MODE
ASR System status ICON with engine off
or key "ON"
ICON with engine on ASR working
ACTIVE and calibrated "ASR" icon: 1Hz slow
flashing
Icons switched off "ASR" icon: 5Hz fast
flashing
ACTIVE not calibrated Icon "ASR OFF": on
steady
Icon "ASR OFF": on steady "ASR" icon: 5Hz fast
flashing
ASR voluntarily deactivated Icon "ASR OFF": on
steady
Icon "ASR OFF": on steady -
ASR system not working Icon "ASR OFF": on
steady
Icon "ASR OFF": on steady -
Programming phase (successful) - "ASR" icon: 1Hz slow flashing (then
when the engine is started, the icons
turn off if the programming is suc-
cessful)
-
Programming phase (failed) Icon "ASR OFF": on steady when en-
gine is started if the programming
has failed
-
Beverly 400 E5 Pre-delivery
PRE DE - 13