- Remove the 2 fixing screws of the brake pump.
- Remove the screw fixing the brake calliper oil
pipe support and move the tubes aside towards
the vehicle front door so as not hinder the next re-
moval operations.
To remove the air filter proceed as follows:
- undo the 3 fixing screws to the engine crankcase;
- remove the blow-by pipe operating on the clamp;
- disconnect the connecting hood to the carburet-
tor by loosening the clamp.
•
Empty the cooling system.
•
Remove the clamps and disconnect
the coolant feeding (engine compart-
ment) and return (water pump) pipes.
Runner 125 - 200 Engine from vehicle
ENG VE - 119
To Next Page
Loading...
