PIAGGIO Runner 125 - Side fairings

Side fairings
The side fairing consists of 3 parts as described in
the figure.
Fairing A
- Remove the 4 screws indicated in the figure and
take out the casing.
Fairing B
- Remove fairing A
- Remove the passenger handles.
- Remove the rear light assembly.
- Remove the license plate holder undoing the 4
screws indicated in the figure.
- Remove the screw of the rear wheel compart-
ment.
- Remove the 2 screws indicated in the figure.
- Remove the screw located below the fairing A
- Pull out the fairing.
Chassis Runner 125 - 200
CHAS - 276