Replacement
-Remove the oil cap «A».
- Unscrew the oil drainage cap "B" and drain out
all the oil.
- Screw in the drainage cap again and fill the hub
with the prescribed oil.
Recommended products
AGIP ROTRA 80W-90 Rear hub oil
SAE 80W/90 Oil that exceeds the requirements of
API GL3 specifications
Characteristic
Rear hub oil
Capacity ~ 150 cm³
Locking torques (N*m)
Hub oil drainage screw 15 ÷ 17 Nm
Runner 125 - 200 Maintenance
MAIN - 43
To Next Page
Loading...
