Connect the 24pin
to the DC Jack Gender
6. Charging the Battery
▪ In order to charge your PDA directly with the adaptor,
you have to connect the 24pin to the DC jack gender with
the adaptor.
※ The 24pin to DC jack gender is an opptional item.
▪ As shown in the picture, identify the top and the bottom
of the connector connected with the adaptor, and insert it
into the junction for power connection of the PDA while
pushing the buttons on both sides of the connector.
▪ After charging it completely, separate the PDA and
adaptor by pressing the buttons on both sides of the
connector.
※ Use the specified adaptor for the PDA.
[Charging with the Adaptor]
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 9 >
BIP-1300
I. Knowing the ProductI. Knowing the Product
※ The 9V 3A adaptor must only be used with the Bluebird products.
If you use it with others PDAs with less voltage, it might cause damage or explosion,
and can lower its durability.
!!
To Next Page
Loading...
