① Go to [Start] → [Settings]
② Select [System] tab, and launch [Barcode Setting]
③ Go to [Start] → [Programs], launch Word Mobile
④ Open a new document.
⑤ Push Barcode button towards the Barcode reader in order to read the barcode you need.
⑥ Values of the barcode read will be shown on the new note.
1. Using Barcode Reader
[Basic Tests for Barcode Reader]
• Setting Barcode
① Steps: Go to [Start] → [Settings] → [System]
② Launch [Barcode Setting]
③ Check if it is in Virtual Wedge <Enable>
If it is in [Disable], set it as [Enable] and click [Yes].
[Setting Barcode Reader]
If the Barcode does not work, set up the barcode as described below.
※ Or, you can launch Barcode Setting with the alternate steps below.
① Steps: [Start]→ [File Explorer]
② On [My Devices], select [Program Store]
③ Launch [Barcode Setting]
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 24 >
BIP-1300
III. FunctionsIII. Functions
※ When you use barcode on specific programs, please consult the producers of the programs.
!!
To Next Page
Loading...
