16
SERIES FE
EN
LOW-PRESSURE GAS REGULATOR | GENERAL INFORMATION | REV. 00
Use, maintenance and warning manual
2.10 - QUALIFIED PROFESSIONAL FIGURES
Qualied operators in charge of using and managing the equipment throughout its technical service life:
Professional gure Denition
Installer
Qualied operator able to:
• handle materials and equipment;
• carry out all the operations necessary to properly install the equipment;
• perform all the operations necessary to safely operate the equipment and system;
• be able to perform all the operations necessary to uninstall and subsequently dispose of
the equipment in compliance with the regulations in force in the country of installation.
The installer is not authorised to use the lifting equipment.
The equipment must be lifted and handled strictly in accordance with the instructions pro-
vided by the manufacturer and the regulations in force at the place where the equipment is
installed.
Commissioning
technician
Technician trained and authorised to use and manage the equipment for the activities it was
supplied for. They must:
• be able to perform all operations required for the proper functioning of the equipment
and the system, and for their safety or that of any personnel present;
• access all device parts for visual inspection, checking equipment status, making adjust-
ments and calibrations;
• have proven experience in properly using the equipment similar to that described in this
manual, and be trained, informed and instructed in this regard.
The skilled technician is not authorised to use the lifting equipment.
Tab. 2.8.