PIETRO FIORENTINI FE Series - Packaging and Fasteners Used for Transport

42
SERIES FE
EN
LOW-PRESSURE GAS REGULATOR | TRANSPORT AND HANDLING | REV. 00
Use, maintenance and warning manual
5.1.1 - PACKAGING AND FASTENERS USED FOR TRANSPORT
The transport packaging is designed and manufactured to avoid damage during normal transport, storage and handling.
The equipment must be kept in the packaging until installation.
Upon receiving the equipment:
• make sure that no part has been damaged during transport and/or handling;
• immediately report any discovered damage to PIETRO FIORENTINI S.p.A..
NOTE!
PIETRO FIORENTINI S.p.A. shall not be liable for any damage to people or property caused by accidents
due to failure to comply with the instructions provided in this manual.
Tab. 5.23. describes the types of packaging used:
Ref. Type of packaging Image
A Multiple cardboard box (impact protection)
B Single cardboard box
Tab. 5.23.