PIETRO FIORENTINI FE Series User Manual

47
SERIES FE
LOW-PRESSURE GAS REGULATOR | TRANSPORT AND HANDLING | REV. 00
EN
Use, maintenance and warning manual
5.4 - PACKAGING REMOVAL
Packaging removal
Operator qualication • Installer.
PPE required
WARNING!
The PPE listed in this table is related to the risk associated with the equipment.
For the PPE necessary to protect against risks associated with the workplace or
operating conditions, please refer to:
• the regulations in force in the country of installation;
• any information provided by the Safety Manager at the installation facility.
Tab. 5.27.
To unpack the equipment in a cardboard box, proceed as follows:
Step Action Image
1 Remove the straps (A).
B
A
A
A
2 Remove the packaging cardboard (B).
3
Remove the fasteners that secure the equipment to the base (if
any).
4
Move the equipment from the base to the place intended for it.
NOTE!
Have at least 2 operators manually move the packages if
required due to their dimensions/weight.
Tab. 5.28.
NOTE!
After removing all packaging materials, check for any anomalies.
If there are anomalies:
• do not install the equipment;
• contact PIETRO FIORENTINI S.p.A. and specify the details provided on the equipment nameplate.
5.4.1 - PACKAGING DISPOSAL
NOTE!
Sort the various materials making up the packaging and dispose of them in compliance with the regula-
tions in force in the country of installation.

PIETRO FIORENTINI FE Series Specifications

General

Brand	PIETRO FIORENTINI
Model	FE Series
Category	Controller
Language	English