PIETRO FIORENTINI FE Series - Surface Treatments

33
SERIES FE
LOW-PRESSURE GAS REGULATOR | DESCRIPTION AND OPERATION | REV. 00
EN
Use, maintenance and warning manual
Type Description
Excess ow, automatic
reset version
This version provides to automatically reset the safety device tripped due to excess ow
(after resolving the cause that caused tripping).
NOTE!
The safety device is reset through a downstream gas discharge with a con-
trolled ow rate not greater than 15 l/h.
Tab. 4.18.
4.4.1 - SURFACE TREATMENTS
NOTE!
Surface treatments (special painting, anticorrosive treatments, galvanising,...) are foreseen for specic
needs and/or particular environmental conditions.