Safety
Operating Manual PNOZ m C0
1006013-EN-02
| 12
} Damage can be attributed to not having followed the guidelines in the manual,
} Operating personnel are not suitably qualified,
} Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
3.4.4 Disposal
} In safety-related applications, please comply with the mission time T
M
in the safety-related
characteristic data.
} When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
3.4.5 For your safety
The unit meets all the necessary conditions for safe operation. However, you should always
ensure that the following safety requirements are met:
} This operating manual only describes the device's basic functions. The advanced func-
tions are described in the online help for the PNOZmulti Configurator and in the docu-
ment "PNOZmulti Special Applications". Only use these functions once you have read
and understood the documentation.
} Please note the "PNOZmulti Installation Manual".
} You must note the information stated in the "PNOZmulti Safety Manual".
} Adequate protection must be provided for all inductive consumers.
} Do not open the housing or make any unauthorised modifications.
} Please make sure you shut down the supply voltage when performing maintenance work
(e.g. exchanging contactors).