Commissioning
Operating Manual PNOZ m C0
1006013-EN-02
| 25
7.6 Using the chip card
NOTICE
The chip card contact is only guaranteed if the contact surface is clean and
undamaged. For this reason please protect the chip card's contact surface
from
– Contamination
– Contact
– Mechanical impact, such as scratches.
Make sure that you do not bend the chip card as you insert it into the chip card slot.
The chip card is not required in order to operate the device.
To remove the chip card, press on the chip card and then pull it out.
To Next Page
Loading...
