Pilz PNOZ m C0 - Technical Details

Technical details
Operating Manual PNOZ m C0
1006013-EN-02
| 30
11 Technical details
General
Certifications CE, TÜV, UKCA
Application range Failsafe
Electrical data
Supply voltage
for Module supply
Voltage 24 V
Kind DC
Voltage tolerance -20 %/+25 %
Max. continuous current that the external power
supply must provide 8,5 A
Output of external power supply (DC) 204 W
Output of external power supply (DC) at no load 1,1 W
External unit fuse protection F1 10 A, circuit breaker 24 V DC, characteristic B
Max. power dissipation of module 4 W
Status indicator LED
Permitted loads inductive, capacitive, resistive
Configurable inputs/outputs (inputs or auxiliary
outputs)
Number 2
Potential isolation No
Configurable inputs
Input voltage in accordance with EN 61131-2 Type
1 24 V
Input current at rated voltage 5 mA
Input current range 2,5 - 5,3 mA
Pulse suppression 0,5 ms
Maximum input delay 14 ms
Configurable auxiliary outputs
Voltage 24 V
Output current 100 mA
Output current range 0 - 120 mA
Max. transient pulsed current 200 mA
Short circuit-proof yes
Residual current at "0" 0,05 mA
Voltage at "1" UB - 2 V at 0.1 A
Inputs
Number 6
Input voltage in accordance with EN 61131-2 Type 1 24 V DC
Input current at rated voltage 5 mA
Input current range 2,5 - 5,3 mA
Pulse suppression 0,5 ms
Maximum input delay 14 ms