Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
3-1
3.1 Intended use
3 Safety
33000SafetySafety3-3.1Intended use31 00Intended use3-Bestimmung/Gertebeschreibung_multi_System
The modular safety system PNOZmulti is used for the safety-related in-
terruption of safety circuits and is designed for use on:
` E-STOP equipment
` Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
Bestimmung/Gertebeschreibung_multi_Zusatz_Achtung_Standard-Ausgaenge_BA
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
The product is designed for use in an industrial environment. It is not
suitable for use in a domestic environment, as this can lead to interfer-
ence.
The following is deemed improper use in particular:
` Any component, technical or electrical modification to the product
` Use of the product outside the areas described in this manual
` Use of the product outside the technical details (see chapter entitled
“Technical Details”)
3.1.1 System requirements
System requirements3-Systemvoraussetzungen
` PNOZmulti Configurator from Version:
– 4.0.0 (PNOZ m0p)
– 7.1.0 (PNOZ m0p ETH)
Please contact Pilz if you have an older version.
CAUTION!
Inputs and outputs for standard functions must not be used for
safety-related applications.
To Next Page
Loading...
Need help?
General
