Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
3-3
3.2 Safety regulations
3 Safety
3.2.4 For your safety
For your safety3-Zu Ihrer Sicherheit_multi_Basis
The unit meets all necessary conditions for safe operation. However,
you should always ensure that the following safety requirements are
met:
` This operating manual only describes the basic functions of the unit.
Information on the expanded functions such as cascading can be
found in the online help for the PNOZmulti Configurator and in the
PNOZmulti technical catalogue. Only use these functions after you
have read and understood the documentation. All necessary docu-
mentation can be found on the PNOZmulti Configurator CD.
` Adequate protection must be provided for all inductive consumers.
` Do not open the housing or make any unauthorised modifications.
` Please make sure you shut down the supply voltage when performing
maintenance work (e.g. exchanging contactors).
To Next Page
Loading...
Need help?
General
