PDP-507XD
130
1234
1234
C
D
F
A
B
E
8.1.3 OPERATION OF SERVICE FACTORY MODE
User data
User data will be treated as follows :
• User data on picture-quality and audio-quality adjustments are not reflected, and factory-preset data are output
(user data will be retained in memory). When the unit enters Service Factory mode, the current audio-quality adjustment
data will be still be retained in memory.
• As to data on various settings, user data will be applied to the items that are associated with signal format change
(screenize switching, etc).
• Data on screen (i.e., screen position; meaning clock dividers, and not including data on screen size).
Are reset to the default values (data stored in memory will be retained).
Screen size will be retained.
Fuctions whose setting are set to OFF
No. Function Remarks
1 2-Screen Operation Input function set on the main side is selected
2 FREEZE
3 Mask Control MTB/MB is none. It becomes processing on the PANEL side.
4 ORBITER Central value operation
To Next Page
Loading...
Need help?
General
