USER MANUAL Page
22
of
92
WARNING:
Non-specified protective goggles may cause damage to eyes.
WARNING:
Inspect your glasses regularly for damage or breakage. Please contact the
designated dealer or visit the company product web site to purchase
replacement goggles.
Never attempt to view the laser beam or the indicator light along an optical
path with eyes or with optical equipment. Direct contact may cause
irreparable damage to the eyes.
Do not remove the protective goggles until the operator returns to the
"Standby" mode.
Never combine optical instruments such as magnifiers or microscopes with
the original protective eyewear. The use of other instruments with the
protective eyewear will not provide sufficient eye protection.
2.4 Clinical Precautions for Laser Safety
Only clinicians who are thoroughly trained in laser operation procedures, safety
precautions and techniques should use S3 units. A thorough understanding of the
material presented in this manual is highly recommended before use.
Before laser procedures, clinicians need to determine the clinical symptoms of
patients and the analysis for appropriate management. Clinicians shall take full
account of the risk of procedures and get the patient's permission.
Laser treatment may result in inadvertent exposure to adjacent tissues.
Undue exposure can result in damage to the tissue, vessel perforation and
bleeding. The practitioner should always set the laser system for minimal
exposure to the patient. Optimal parameters for laser surgery may be
achieved by starting with the power as low as possible and increase each
parameter as necessary. Power levels affect precision of cut, rate of tissue
removal and thermal damage to adjacent tissues.
To Next Page
Loading...
Need help?
General