- 57 -
Allow modify the 802.1x Misc configuration. The screen in Figure 4-84 appears.
Figure 4-84 802.1x Misc Configuration screen
Setup procedure:
1. Press “Edit”.
2. Quiet Period: set the period during which the port doesn’t try to acquire a supplicant. The available
ranges are 0-65535 and default mode is 60.
3. TX Period: set the period the port wait for retransmit next EAPOL PDU during an authentication
session. The available ranges are 0-65535 and default mode is 30.
4. Supplicant Timeout: set the period of time the switch wait for a supplicant response to an EAP
request. The available ranges are 1-300 and default mode is 30.
5. Server Timeout: set the period of time the switch wait for a server response to an authentication
request. The available ranges are 1-300 and default mode is 30.
6. Reauthorize Maximum: set the number of authentication that must time-out before authentication
fails and the authentication session ends. The available ranges are 1-10 and default mode is 2.
7. Reauthorize period: set the period of time after which clients connected must be re-authenticated.
The available ranges are 1-9999999 and default mode is 3600.
8. After setup completed, press” ESC” and choose “Save” to save the current configure. The screen in
Figure 4-85 appears.
Figure 4-85 802.1x Misc Configuration save successfully screen
Press any key for return to previous menu.
4.4.3.5.5 Previous Menu
Return to Protocol Related Configuration screen.
To Next Page
Loading...
Need help?
General
