- 60 -
4.4.4.3 TFTP Configuration
Provide firmware upgrade through the TFTP server method. The screen in Figure 4-91 appears.
Figure 4-91 TFTP Configuration screen
This subnet menu contains four items:
Update Firmware: please refer to chapter 4.4.4.3.1.
Restore Configuration: please refer to chapter 4.4.4.3.2.
Backup Configuration: please refer to chapter 4.4.4.3.3.
Previous Menu: please refer to chapter 4.4.4.3.4.
4.4.4.3.1 Update Firmware
Provide firmware upgrade through TFTP sever method, the screen in Figure 4-92 appears.
Figure 4-92 TFTP Update Firmware screen
Setup procedure:
1. Download the latest firmware from Planet website, and copy the firmware version image file to the TFTP
server.
2. Press “Edit”
3.TFTP Server IP: input the IP address of the workstation that install TFTP server.
4.Firmware File Name: input the image file name.
5. After setup completed, press” ESC” and choose “Save” to save the current configure, the system will
start to download the image file. The screen in Figure 4-93 appears.
To Next Page
Loading...
