- 61 -
6. When the image file download completed, Restart switch, please reboot the Switch for new firmware.
Figure 4-93 TFTP Update Firmware process screen
4.4.4.3.2 Restore Configuration
Provide restore the configuration through the TFTP server method, the screen in Figure 4-94
appears.
Figure 4-94 TFTP Restore Configuration screen
Setup procedure:
1.Press “Edit”
2.TFTP Server IP: input the IP address of the workstation that install TFTP server.
3. Restore File Name: input the restore file name.
4. After setup completed, press” ESC” and choose “Save” to save the current configure, the system will
start to download the image file. The screen in Figure 4-95 appears.
To Next Page
Loading...
