Point Mobile PM75 - PM75 RFID Reader (RF750) Connection

PM75 Android 11 User Manual
Wireless
67
© 2021 Point Mobile Co., Ltd. All rights reserved
NFC
NFC feature is enabled by default. But if NFC does not work, make sure the NFC is enabled from
the Quick setting panel.
PM75around the battery cover release button. Bring the NFC tag close to
the battery cover release button (Rear-upper side of the device) as below.
NFC Tagging Area
Figure 87 PM75 NFC tagging area
Figure 86 Turn on NFC in Quick setting panel
Figure 88 Tagging NFC tag