POL-EKO SMART User Manual

Instruction Manual SMART
POL-EKO-APARATURA sp.j. • ul. Kokoszycka 172 C • 44-300 Wodzisław Śl. • tel./fax +48 32 453 91 70 • e-mail info@pol-eko.com.pl
29
program name
The name of program
current segment
Currently performing segment / total number of segments in the program
priority
In regard of time or parameters, more information can be found on » page 35
time set
Set time of performing segment
time elapsed
Elapsed time after reaching the segment
time remaining
Remaining time until the end of the segment
current loop
Currently performing cycle/ total number of cycles to perform » page 35
protection class
over temperature
under temperature
Information about the protection temperature associated with a running or com-
pleted program. The protection parameters can be set in the program parame-
ters »page 31. Information about protection classes »page 36.
upper alarm temp
lower alarm temp
information about the set alarms, separately for overrunning up and down.
Alarms set » page 53.

POL-EKO SMART Specifications

General

Brand	POL-EKO
Model	SMART
Category	Controller
Language	English