51
5.12. Time
In this panel you can:
• change date / system time,
• change time zone
Date and time cannot be changed while the program is running.
If you change the date and time to an earlier than the current one, a message will appear on the display:
“Changing the date/time will interfere with the records in the database. Delete the data from data record and
event log first, then change the date/time.”
You must first delete the data from the “data record” and from “event log” and then change the date/time.
To change the system date or time, press the button Figure 28. In the next window (Figure 29) you can
change settings.
To Next Page
Loading...
