POL-EKO-APARATURA sp.j. • ul. Kokoszycka 172 C • 44-300 Wodzisław Śl. • tel./fax +48 32 453 91 70 • e-mail info@pol-eko.com.pl
6
1. IMPORTANT INFORMATION FOR THE USER
All warnings included in this instruction manual, especially these which appear next to the
warning or informative symbols, should be obeyed at all times to ensure the safety of the
user and to maintain the proper operation of the unit!
The manufacturer does not take any responsibility for any damage which results from dis-
obeying the instruction manual and misuse!
For SL: When the device is working on 200
o
C or higher temperature, the housing and door can
be hot.
For units equipped with UV lamps: take necessary safety precautions. Do not expose your
hands, skin and eyes to UV radiation as it may cause eyes diseases (conjunctivitis) or skin dis-
eases (red spots or cancer). It is recommended not to open the unit while the UV lamps are on.
The user should be equipped with protective gloves and glasses.
This symbol indicates helpful tips.
To guarantee your security and the longevity of the unit, please comply with the following rules:
The unit cannot be installed:
• outside,
• in damp places or places which can be easily flooded,
• near flammable or volatile substances,
• near acids or in corrosive environments.
It is forbidden to:
• store inflammable or volatile substances inside the unit,
• touch live parts of the unit,
• operate the unit with wet hands,
• load the outer casing of the unit
• overload the shelves (the maximum load is described in technical data).
You should:
• place samples in such a way to provide proper air circulation in the chamber,
• open the door for the shortest period of time to reduce temperature fluctuations,
• defrost the chamber if you open the door or store humid samples,
• if possible, do not store warm samples,
• secure samples from being blown out by the chamber fan e.g. powdery samples,
• always check that the doors are closed,
• use only earthed mains to avoid electric shocks,
• unplug the power cable holding the protective cover and not the cable itself,
• disconnect the unit from the mains before undertaking any repairs or maintenance works,
• protect the power cable and the plug from any damage,
• disconnect the power plug before moving the unit,
To Next Page
Loading...
Need help?
General