7.14
FINAL DRIVE
P
RELIMINARY
V
ERS
I
ON
FRONT GEARCASE / CENTRALIZED HILLIARD
Centralized Hilliard Exploded View
REF# DESCRIPTION QTY REF# DESCRIPTION QTY
1 Cover Screws, M6 (T30 Torx) 6 18 Bushing 4
2 Cover Plate Assembly 1 19 Vent Hose Fitting
3 Clutch Housing 1 20 Drain Plug, Magnetic
4 Gearcase Housing 1 21 Fill Plug
5 Roll Cage 2 22 Thrust Button Assembly
6 Hub Sub-Assembly (Female) 6 23 Dowel Pin
7 Hub Sub-Assembly (Male) 1 24 Set Screw, M6
8 Connector 1 25 Input Cover
9 Plastic Clip 1 26 Bearing
10 Thrust Plate 2 27 Spacer, Pinion Cover (Nylon)
11 Armature Plate 6 28 Ball Bearing
12 Pinion 1 29 O-Ring
13 Oil Seal 1 30 Hub / Race Assembly (Female)
14 Grommet 1 31 Hub / Race Assembly (Male)
15 O-Ring, Square 2 32 Nylon Spacer
16 AWD Coil 2 33 Bushing
17 Rollers 2 34 H-Clip Spring
7-11 ft. lbs.
(10-15 Nm)
8-10 ft. lbs.
(11-14 Nm)
8-10 ft. lbs.
(11-14 Nm)
7-11 ft. lbs.
(10-15 Nm)
To Next Page
Loading...
Need help?
General
