3.64
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
8. Install the upper cam chain guide and the (8) bolts
that retain the camshaft carrier. Tighten the bolts
evenly until snug. Do not torque at this time.
9. Install the Cylinder Holding and Camshaft Timing
Plate (PU-50563) into the end of camshafts as
shown.
10. Verify cam timing is correct and the piston is a TDC.
11. If timing marks are not aligned:
• Remove the Camshaft Timing Plate (PU-50563)
from the end of the camshafts.
• Remove the cam carrier bolt and cam carrier.
• Correct the camshaft timing as needed.
• Reinstall the cam carrier.
• Re-check cam timing.
12. Remove the Cylinder Holding & Camshaft Timing
Plate (PU-50563) from the end of the camshafts.
13. If needed, install the camshaft carrier and bolts.
ENGINE
To Next Page
Loading...
