2
2.33
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
4. Remove the screw (see (2) shown in step 3) that
fastens the hold-down strap and remove the hold
down strap(1).
NOTE:
5. Lift the battery out of the vehicle.
Battery Installation
NOTE: Using a new battery that has not been fully
charged can damage the battery and result in a
shorter life. It can also hinder vehicle performance.
Follow the battery charging procedure in Chapter 10
“Electrical” before installing the battery.
CAUTION
To reduce the chance of sparks: Whenever removing
the battery, disconnect the black (negative) cable first.
When reinstalling the battery, install the black (negative)
cable last.
1. Ensure the battery is fully charged.
2. Place the battery in the battery holder and secure
with hold-down strap. (see (2) shown in step 4)
3. Coat the terminals with dielectric grease or
petroleum jelly.
4. Connect and tighten the red positive cable(s) first.
MAINTENANCE
To Next Page
Loading...
Need help?
General
