10.20
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
Testing
Using the special tools listed, test the speed sensor
according to the tester instructions. Remove sensor and
inspect the o-ring seal for damage or wear and replace
as required. Replacement of sensor is required as it is
not serviceable.
Speed Sensor
Test Using Special Tools:
Static Timing Light Harness
PN 2871745
Hall Sensor Probe Harness
PN 2460761
Replacement
1. Remove the sensor retaining using a suitable tool.
2. Coat o-ring of new sensor with anti-seize compound
or sealant.
3. Push new sensor into gearcase housing. Install bolt
and tighten to specification.
Speed Sensor Bolt:
8-12 ft-lbs (11-17 Nm)
ELECTRICAL
To Next Page
Loading...
