Polaris 2014 Sportsman 570 EPS Forest - Cps Replacement

4.24
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
CPS Replacement
1. If not done already; disconnect the CPS harness
connector (see “CPS Test”).
2. Using an 8mm socket, remove the CPS retaining bolt
and remove the sensor from the stator cover.
3. Install new sensor using a light coating of oil on the
O-ring to aid installation.
4. Torque the CPS and heat shield retaining bolts (if
equipped) to specification.
CPS Retaining Bolt:
9 ft-lbs (12 Nm)
5. Re-install the right side footwell and side panel.
FUEL SYSTEM - GENERAL