6.32
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
Moveable Sheave - Bushing Installation
1. Working from the top, insert Puller Adapter (#10) (PN
5020633) onto the puller.
2. Start new bushing evenly in moveable sheave. Apply
Loctite™ 680 to the back side of new bushing.
3. Install sheave onto puller with new bushing upward
as shown. Install Puller Adapter (#10) (PN 5020633).
4. Install nut onto puller rod and hand tighten against
installation tool.
5. Turn clutch sheave counterclockwise until bushing is
seated.
6. Remove nut from puller rod and set aside.
7. Remove installation tool and clutch sheave from
puller.
8. Repeat installation procedure for other moveable
bushing.
9. Install new ramp buttons into the sheave. Apply
thread locking agent to the fasteners. Install
fasteners and tighten securely.
CLUTCHING
To Next Page
Loading...
