3
3.21
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
11. Remove the pressure cap. Add the necessary
amount of Polaris Premium Antifreeze to the radiator
filler neck.
12. Open the bleed screw to allow any trapped air to
escape. Close the bleed screw once a steady stream
of coolant begins to drain out.
13. Tighten the bleed screw to specification, top off
coolant and properly install the pressure cap.
Coolant Bleed Screw:
6 ft-lbs (8 Nm)
14. Fill the recovery bottle to the MAX line.
15. Reinstall the Left side panel, required PVT ducting
and Center panel under the front rack.
ENGINE
To Next Page
Loading...
