41
Camera Messages
MESSAGES ACTION
Camera attached.
Firmware sync in
progress, do not remove
camera.
(CCX 600 only)
Your camera is upgrading. Do not remove your camera during this
process. The upgrade is complete when you receive a message stating
that either “firmware sync complete” or “upgrade failed”.
Camera firmware sync
complete. Camera ready.
Indicates that your camera is ready to use.
Camera firmware sync
complete. Contact
administrator to enable
video.
Indicates that your camera is ready to use. However, your phone is not
enabled to send and receive video. Contact your system administrator to
enable video calls.
Camera firmware sync
complete. Camera
rebooting.
Indicates that the camera firmware sync is finished and your camera is in
the process of rebooting.
Camera firmware
sync complete. Video
available when next idle.
Indicates that your camera is ready to use for your next video call.
Camera attached,
camera ready.
(CCX 600 only)
Indicates that your camera is ready to use.
Camera attached.
Contact administrator to
enable video.
(CCX 600 only)
Indicates that your camera is ready to use. However, your phone isn't
enabled to send and receive video. Contact your system administrator to
enable video calls.
Camera attached. Video
available when next idle.
(CCX 600 only)
Indicates that your camera is ready to use for your next video call.
Camera removed.
(CCX 600 only)
Indicates that you have detached your camera from your phone.
Camera is not connected.
(CCX 600 only)
Indicates that a camera is not attached to your phone and that you are
accessing a feature or function that requires that the camera be attached.
Managing Video Calls without a USB Camera
A video-enabled CCX 600 phone can receive video even if you don’t attach a USB camera.
Placing a video call on hold stops the video stream. The phone replaces the video with a placeholder
image. Resume the video call to start the video stream.
To Next Page
Loading...
Need help?
General
