Poly E Series - Page 66

66
Procedure
1. Go to Basic  Power Saving  Timeouts.
2. Configure the following options:
 Office Hours Idle Timeout: The number of minutes (1 to 600) the phone waits during office hours
before starting power saving mode.
 Off Hours Idle Timeout: The number of minutes (1 to 10) the phone waits during nonoffice hours
before starting power saving mode.
 User Input Idle Timeout: The number of minutes (1 to 10) the phone waits after you press a key or
tap the screen before starting power saving mode.
3. Select Save.
Changing Audio Settings
You control certain audio settings on your phone, including the ringtone for incoming calls from all
contacts or a specific contact, where call notifications play, and the volume of the ringtone or call
audio.
Change Incoming Call Notifications
You can choose whether you hear sound effects—all phone sounds except call audio—from the handset,
headset, speaker, or the active audio device you set.
You can configure your phone to ring on your headset instead of the speaker. By default, you hear all
sound effects from the speaker.
Procedure
1. Go to Settings  Basic  Preferences.
2. Select Audible Ringer and select a location to hear sound effects.
Set a Ringtone for Incoming Calls
One way to personalize your phone is to change the ringtone. You can pick unique ringtones for the
different lines on the phone. The default ringtone is Low Trill.
Procedure
1. Go to Settings  Basic  Preferences.
2. Select Ring Type.
3. On the Ring Type screen, select a ringtone.
4. Optional: Select Play to hear the ringtone.
Related Links: Users Who Are Deaf or Hard of Hearing on page 19