82
Updating the Phone Software
You can update the software on your phone when a new software version is available.
When new software is available, a notification is displayed on your phone and you have the option to
update your software, postpone the software update, or exit the notification.
When the software update notification is displays your phone, you can choose to update your phone's
software at that time.
Procedure
When prompted to update your software, select Update.
The phone reboots and the software updates.
Update the Software Later
If you exit the software update, you can press the SWUpdate soft key to update your phone's software
at any time after you exit the software update notification.
Procedure
Press the SWUpdate soft key.
Postpone Software Updates
Instead of updating your software immediately, you can choose to postpone the update for a later time.
You can choose to postpone the software update from 15 minutes up to six hours. You can postpone
the software update up to three times. After the third time, the notification is displayed without the
Postpone option.
If you do not update the phone's software after the postpone time, a notification with a countdown is
displayed and the phone automatically reboots and updates the software when the countdown ends.
Procedure
1. When prompted to update your software, select Postpone.
2. Select one of the time options.
The notification is removed from the phone screen and is displayed again during the remaining five
minutes of the postpone time selected.
Note: If you postpone a software update and the time period you chose ends while you're on an
active call, a software update notification with a countdown is displayed after the call ends. After the
countdown ends, the phone reboots and updates the software.
Exit the Software Update Notification
When the software update notification displays, you also have the option to exit the notification without
choosing to update or postpone the software.
Procedure
When prompted to update your software, select Exit.
When you exit the notification, the SWUpdate soft key displays on the Lines screen.
To Next Page
Loading...
Need help?
General
