EasyManuals Logo

Poly VVX D230 DECT User Manual

Poly VVX D230 DECT
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Procedure
1. On a registered handset, enter the pick-up prefix + the parking lot number.
For example, enter 702.
2. Press Call .
Rejecting Incoming Calls
You can reject incoming calls manually via the handset, or automatically by enabling Do Not Disturb
(DND).
Reject an Incoming Call
You can reject rather than answer incoming calls on the wireless handset.
Procedure
» Press End .
Rejecting Calls with Do Not Disturb
Do Not Disturb (DND) enables you to set your phone to automatically reject calls when you don’t want to
be interrupted.
Enable Do Not Disturb
Do Not Disturb (DND) enables you to set your phone to automatically reject calls when you don’t want to
be interrupted.
Procedure
1. Go to Menu > DND.
2. Do one of the following:
To enable DND on all lines, choose Select all.
To enable DND on specific lines, select the lines where you want to enable DND.
3. Select OK.
Disable Do Not Disturb
If you disable Do Not Disturb, incoming calls ring normally.
Procedure
1. Go to Menu > DND.
2. Clear the lines where you want to disable DND.
3. Select OK.
Audio Calls
16

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Poly VVX D230 DECT and is the answer not in the manual?

Poly VVX D230 DECT Specifications

General IconGeneral
BrandPoly
ModelVVX D230 DECT
CategoryIP Phone
LanguageEnglish

Related product manuals