Polycom 331 - Page 62

62
1. Press .
2. Select Settings > Basic > Preferences > Headset > Headset
Memory.
3. Use the or to select Enabled.
4. Press to conrm your choice.
4. Press the Save soft key to accept changes or to cancel
changes.
5. Press or repeatedly to return to the idle
display.
Headset Memory Mode
This feature is especially useful for permanent or full-time headset us
-
ers.
To permanently enable the Headset Memory Mode:
5. Press or repeatedly to return to the idle
display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory
Mode off.
To activate Headset Memory Mode:
Press twice.
Pressing or Answer soft key to receive a call will
now connect to the your headset automatically.
Electronic Hookswitch
This feature enables electronic hookswitch support.