Polycom 331 - Page 63

63
For information on supported headsets to provide electronic hook-
switch features for placing, answering, and ending calls, go to www.
polycom.com/support/voice and enter “Headset Compatibility List” in
the Knowledge Base text box or contact your system administrator.
1. Press .
2. Select Settings > Basic > Preferences > Headset > Analog Head
set Mode.
3. Use the or to select your headset and press the Select
soft key.
1. Press .
2. Select Settings > Basic > Ring Type.
3. Using and , select the desired ring type.
Press the Play soft key to hear the selected ring type.
To select a headset that supports electronic hookswitch:
4. Press or the Exit soft key repeatedly to return to
the idle.
Ring Type
You can select from the different ring types to have a different
ring from your neighbor’s phone.
To change the incoming ring to a desired sound:
4. Press the Select soft key to change to the selected ring type.
5. Press or repeatedly to return to the idle display.