Using the Touch User Interface
Polycom, Inc. 51
RealPresence Media Suite Touch Tones
You can use enter touch tones with the touch interface, a touch device, or remote control to manage the call
recording.
The supported touch tone codes for activating the button controls on the TVUI are listed in this table.
Record Calls with RealPresence Media Suite
When you establish a connection to a RealPresence Media Suite, the recording starts and the TVUI displays
in a call window. Unless the administrator for the RealPresence Media Suite has disabled the Start
Recording Immediately option, the recording starts immediately after the TVUI displays.
You can use either the touch monitors or the remote control to dial into RealPresence Media Suite and
activate the TVUI.
1 Enter the IP, H.323, or SIP address of the Media Suite.
The TVUI displays in the call window.
2 If the recording does not start immediately, do one of the following to start recording:
 Press *2 on the remote control.
 Tap to open the Quick Access menu then tap More > Touch Tones and enter *2 on
the onscreen dial pad.
Stop Recording
Before ending a call, make sure to stop the recording.
» Do one of the following:
 Press *3 on the remote control.
 Tap to open the Quick Access menu, tap More > Touch Tones, and enter *3 on the
onscreen dial pad.
TVUI State Operation Touch Tone Code
Menu display state Pause recording *1
Start a recording
Resume a paused recording
*2
Stop a recording *3
Playback a recording *5
Video playback state Pause the video *1
Start the video
Resume a paused video
*2
Stop a playback and return to the main menu *3
Reverse a video *4
Fast forward a video *6
To Next Page
Loading...
Need help?
General
