Polycom RealPresence Group 310 User Manual

Polycom, Inc. 79
Using a Polycom Touch Control Device
Polycom Touch Control has a touch screen that allows you to control a RealPresence Group system. You
can use the Polycom Touch Control to place calls, adjust the volume, control the camera, show content, and
select options.
This section includes the following topics:
● “Using the Polycom Touch Control as a Virtual Remote Control” on page 80
● “Calling” on page 81
● “Content” on page 86
● “Recording Calls” on page 91
● “Settings” on page 92
Power On the Polycom Touch Control
If you want to use a Polycom Touch Control with your RealPresence Group system, you must first power it
on.
» To power on the Polycom Touch Control, connect the LAN cable to the underside of the device.
The Home button is lit when the device is powered on.
Wake the RealPresence Group System
The Polycom Touch Control device goes to sleep after 2 minutes of inactivity.
» To wake the Polycom Touch Control, touch the screen. This, in turn, wakes the paired RealPresence
Group system.
Pair a Polycom Touch Control with a RealPresence
Group System
Before you make a call using the Polycom Touch Control, you must pair the Polycom Touch Control with a
RealPresence Group system.
After the devices are successfully paired, the remote control no longer has control of the system.
TASK
1 Do one of the following:

Polycom RealPresence Group 310 Specifications

General

Network Protocols	H.323, SIP
Network Interfaces	1 x 10/100/1000 Ethernet
Video Resolution	1080p, 720p
Audio Standards	G.711, G.722, G.722.1, G.728, G.729A
Video Standards	H.263, H.263+, H.264, H.264 High Profile
Network	10/100/1000 Ethernet
Video Input	1 x HDMI
Video Output	HDMI
Audio Input	1 x 3.5mm stereo line-in
Audio Output	1 x 3.5mm stereo line-out
Other Interfaces	2 x USB 2.0
People Video Resolution	1080p
Content Sharing	People+Content IP
Security	AES
Camera	Polycom EagleEye Acoustic or EagleEye IV