Polycom SoundStation Duo - Controlling What Is Heard; Changing the Ring Tone

User Guide for the Polycom
®
SoundStation Duo
™
Conference Phone
108 Polycom, Inc.
Your phone shows shared line status as described in the following table.
Controlling What is Heard
You can change what is heard by doing the following:
• Changing the ring tone.
• Selecting unique ring tones for contacts.
• Adjusting the volume of the speaker.
• Adjusting the volume of the ring tone.
• Muting the microphones so the far site(s) can’t hear you.
Changing the Ring Tone
You can select from many different ring tones to distinguish your phone from
your neighbor’s.
To select a different ring tone:
1 Press , and then select Settings > Basic > Ring Type.
2 From the Line Select screen, select the line to which you want to apply the
ring tone.
3 From the Ring Type screen, select the ring type you want. To hear the
ring type before you select it, press the Play soft key. The default ring
type is Low Trill.
Shared Line Status
Indicator Lights When Your Phone is
Idle
All phones that you share a line with are
idle.
None
A phone you share a line with has an
active call.
Solid red
A phone you share a line with has a
held call.
Solid or flashing red (depending which
phone initiated the hold).
Note
• You can’t forward or reject calls on shared lines.
• Enabling Do Not Disturb on shared lines disables ringing only. The call will still
display on your screen, and you can still choose to answer the call.