Polycom SoundStation Duo - Ending Conferences; Managing Conferences; Splitting Conferences into Two Calls on Hold

Using Your Conference Phone in SIP Mode
Polycom, Inc. 69
The Hold:Conference screen displays. The other two conference participants
are placed on hold. The indicator lights flash red to indicate a held call.
To resume the conference call, press the Resume soft key. The
Active:Conference screen will display again.
Splitting Conferences into Two Calls on Hold
When you split a conference, you end the conference and place the other two
conference participants on hold.
To split a conference:
>> From the Active:Conference or Hold:Conference screen, press the
Split soft key.
The conference ends, and all calls are split into individual calls and placed on
hold.
Ending Conferences
When you end a conference, you end your connection to the other conference
participants. By default, the other parties remain connected.
To end a conference:
>> From the Active:Conference screen, press the End Call soft key.
By default, the conference ends and the other two conference participants
remain connected.
Managing Conferences
If you’re in an active conference call, you can press the Manage soft key to
manage each conference call participant.
From the Manage Conference screen, you can scroll to a conference participant
and do the following:
• Place the participant on hold.
• Remove the participant from the conference.
• Obtain additional information about the participant.
• Mute the participant.